Sharp Vacuum Cleaner 6830 User Manual

VACUUM CLEANER  
®
Household Type  
OWNER’S GUIDE  
6830 SERIES  
IMPORTANT  
Do not return this product to the  
store.  
For assembly problems or  
questions contact: Eureka’s  
Customer Service Division  
toll  
free at 1-800-282-2886*, 8 a.m. to 7:  
30 p.m., (CST), Monday - Friday and  
10 a.m. to 6:30 p.m. Saturday.  
For replacement of broken or  
missing items to be shipped direct  
to you, call 1-800-438-7352*, 8 a.m.to  
4:45 p.m., (CST), Monday - Friday.  
To order replacement parts and  
accessories call 1-800-438-7352*,  
8 a.m. to 4:45 p.m., (CST), Monday  
- Friday or visit our web site,  
Index  
Please Retain  
Important Information ...2  
Assemble......................3  
Use ...............................3  
Accessories..................4  
Filter..............................4  
Dust Bag.......................4  
Brush Roll.....................5  
Brush Roll Belt..............5  
Warranty.......................5  
We suggest you record the model, type and serial numbers  
below. They are located on the silver rating plate on your  
cleaner.For prompt and complete service information, always  
refer to these numbers when inquiring about service.  
Model& Type____________________  
Serial No. ______________________  
It is also important to keep your receipt as proof of date of  
purchase.  
©2004 White Consolidated, Ltd.  
Printed in U.S.A.  
Part No. 73350 (02/04)  
 
IDENTIFY PARTS OF CLEANER  
ASSEMBLY  
8
7
1
1
2
3
Snap interlocking wands  
together.  
3
2
3a  
Push assembled wands into  
power nozzle.  
4
3
5
Place Power-Touch hose  
handle into wands until plug  
connects and button locks.  
4
Insert hose coupling into top  
of canister.  
1
6
1. Cord Rewind Pedal.  
2. On/Off Pedal.  
3. Bag Indicator (on some models)  
3a. Tool Cover Latch  
4. Hose Inlet  
5. Bag Cover Latch (on top of bag cover)  
6. Carrying Handle (on the bottom)  
7. Variable Speed Control  
Quick Release Foot Pedal  
(on some models) Press  
down on pedal for quick  
release of wands from  
powerhead.  
2
6
4
7
Pull electric plug out from  
back of cleaner push plug  
into outlet. To rewind, step on  
Cordaway cord reel button,  
hold and guide plug while it  
rewinds.  
5
8
9
10  
5
NOTE: When pulling on electric cord watch for  
a yellow line on the cord. Then continue slowly  
pulling on cord till you see the red line, stop. The  
red line indicates the end of usable cord.  
HOW TO USE  
8. Exhaust Filter  
9. Motor Filter (behind dust bag)  
10. Disposable Dust Bag  
A carpet should be cleaned regularly over heavily traveled  
areas, and once a week over the entire carpeted area.  
Vacuum slowly, making several passes (forward and back-  
ward) over the carpet, covering small areas at a time. The  
time required to clean the carpet will depend on several  
factors–including type of carpet and amount of dirt.  
Step on handle release on the motorized nozzle to  
release handle; pull back to comfortable work position.  
6
7
Push ON/OFF Pedal  
(A thermostat automatically shuts the motor off if it  
overheats, see Automatic Motor Shut-Off)  
11  
Bare floor or carpet cleaning selection on remote  
control, only. See page 4.  
8
11. Electric Cord  
3
 
HOW TO USE (continued)  
POWER-TOUCH® Handle  
Bag Change Indicator  
Remote ON/OFF Selector for bare floor or carpet  
ON – push down on front  
The bag change indicator bar fills as the airflow through the  
bag decreases. Certain types of fine particles like powder,  
plaster dust, or carpet fibers can restrict airflow very quickly  
and will decrease performance even before the bag appears  
to be full.When the warning appears, change the disposable  
dust bag to restore maximum performance. If a clean dust  
bag does not restore maximum performance, clean the filters  
and check the hose and wands for obstructions.  
*Off – push down on back for bare floors.  
Vacuum Control  
Cleaning suction is reduced by pushing lever to  
LOW position. Place lever at HIGH position to  
increase suction for carpet cleaning.  
Empty Bag  
Filled Bag  
*Power ON/OFF for canister can only be controlled by canister  
ON/OFF switch.  
HOW TO CHANGE DISPOSABLE DUST BAG  
- Style CN2 and FILTER - Style EF3  
Cleaning Tools  
Crevice Tool (stored inside cleaner): For  
crevices, corners, baseboards, between  
cushions.  
NOTE: Turn off the power switch and disconnect  
electrical cord from wall socket before  
changing dust bag. Never use the cleaner  
without a dust bag or filters.  
Dusting Brush (stored inside cleaner):  
For furniture, blinds, books, lamp shades,  
shelves.  
To remove used dust bag and check filters:  
1. Unplug the hose from the bag compartment lid.  
2. Squeeze bag compartment latch and swing lid up.  
3. Lift exhaust filter out of bag compartment. If dirty, clean  
or replace. The filter can be cleaned by brushing over a  
waste receptacle. Place filter back in bag compartment.  
4. Grasp bag collar and lift used bag out of cleaner and throw  
away.  
Upholstery Nozzle (stored inside cleaner):  
For curtains, draperies, cushions, fabrics.  
5. Pull down on motor filter grille to release the motor filter.  
If dirty, clean or replace. The filter can be cleaned by  
brushing over a waste receptacle. Replace filter in grille,  
rotate grille up and push against cleaner to latch.  
Turbo Brush: (on some models) For upholstery  
and for stairs.  
Bare Floor Brush: (on some models) For any type  
of hard surface floor.  
4.  
5.  
3.  
HOW TO MAINTAIN  
The paper bag and filters play a very important role in the  
efficiency of the vacuum cleaner. The purpose of the paper  
bag is to trap dirt and at the same time the paper must be  
porous enough to allow air to pass through. If the paper bag  
or filters become clogged, no air can pass through the cleaner  
and no cleaning takes place regardless of how powerful the  
unit. To keep the cleaner operating at maximum efficiency,  
change the dust bag frequently and clean the filters as  
necessary.  
To install disposable dust bag:  
1. Hold dust bag by collar and push dust bag into bag  
frame.  
2. Rotate bag compartment lid down and press against  
cleaner until it latches.  
Brush Roll  
The brush roll turns to sweep and comb the carpet nap.Keep  
the brush roll free from hair and threads so it will continue  
cleaning. When the bristles of the brush roll no longer touch  
a piece of cardboard held across the bottom plate, the brush  
roll is ineffective because the bristles no longer touch the  
carpet nap. To maintain the most effective cleaning, install a  
new brush roll.  
Some fine particles can restrict airflow very quickly and will  
decrease performance even before the bag appears to be  
full. When vacuuming carpet fresheners or cleaners, plaster  
dust, or similar fine substances, clean the bag and filters  
more often.  
4
 
Brush Roll Belt and Light Bulb  
The brush roll belt on the motorized nozzle drives the brush  
roll to agitate, sweep, and comb the carpet nap. The belt  
THE EUREKA LIMITED WARRANTY  
should be checked regularly to be sure that it is in good What This Warranty Covers  
Your Eureka cleaner is warranted to be free from all defects in material and workmanship  
condition.Replace the belt if it is broken, stretching, cracking,  
or slipping. Cut away any hair or thread wound around the  
brush roll or belt pulley because the buildup could cause the  
belt to rotate unevenly.  
in normal household use for a period of one year. The warranty is granted only to the  
original purchaser and members of his or her immediate household. The warranty is  
subject to the following provisions.  
What This Warranty Does Not Cover  
Parts of the cleaner that require replacement under normal use, such as disposable dust  
bags, filters, drive belts, light bulbs, brush roll bristles, impellers and cleaning.  
Damages or malfunctions caused by negligence, abuse, or use not in accordance with the  
Owner’s Guide.  
How to Replace Worn Belt or Light Bulb  
(On Some Models)  
Defects or damages caused by unauthorized service or the use of other than Genuine  
NOTE: Turn off the switch and unplug the electrical cord  
before replacing belt or bulb. Pulleys can become  
Eureka parts.  
hot during normal use. To prevent injury, avoid What The Eureka Company Will Do  
The Eureka Company will, at its option, repair or replace a defective cleaner or cleaner part  
touching the pulleys when servicing the drive  
belt.  
that is covered by this warranty. As a matter of warranty policy, the Eureka Company  
will not refund the consumer’s purchase price.  
Warranty Registration  
Please fill out and return the warranty registration card accompanying your cleaner.  
Obtaining Warranty Service  
1. Remove six screws from  
To obtain warranty service you must return the defective cleaner or cleaner part along with  
proof of purchase to any Eureka Authorized Warranty Station.  
bottom side. Turn unit  
over; pull up on hood to  
remove.  
You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service  
and Repair.” Be certain that the Warranty Station is “Eureka Authorized.”  
For the location of the nearest EurekaAuthorizedWarranty Station or for service information  
Canada: 1-800-282-2886.  
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main  
Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company,  
866 Langs Drive, Cambridge, Ontario N3H 2N7.  
If it is necessary to ship the cleaner outside your community to obtain warranty repair, you  
must pay the shipping charges to the Eureka Authorized Warranty Station.  
Return shipping charges will be paid by theWarranty Station.When returning parts for repair,  
please include the model, type, and serial number from the data plate on the cleaner.  
Replace light bulb,  
if necessary. Use  
GENUINE EUREKA  
replacement bulb,  
59045.  
Continue to step 2  
to change belt. Skip  
to step 7 to replace  
hood.  
Further Limitations and Exclusions  
Motor Pulley  
Any warranty that may be implied in connection with your purchase or use of the cleaner,  
including any warranty of Merchantability or any warranty for Fitness For A Particular  
Purpose is limited to the duration of this warranty. Some states do not allow limitations  
on how long an implied warranty lasts, so the above limitations may not apply to you.  
Your relief for the breach of this warranty is limited to the relief expressly provided above.  
In no event shall Eureka be liable for any consequential or incidental damages you  
may incur in connection with your purchase or use of the cleaner. Some states do not  
allow the exclusion or limitation of incidental or consequential damages, so the above  
limitation or exclusion may not apply to you.  
2. Lift out brush roll and  
discard used belt.  
This warranty gives you specific legal rights. You may also have other rights which vary  
3. Put new belt around  
brush roll pulley first;  
then the motor pulley.  
by state.  
.
For Genuine Eureka Value, Accept No Imitations!  
THE EUREKA COMPANY  
Bloomington, Illinois 61701  
4. Place left end cap into the  
base.  
5. Pull right end of brush  
roll to stretch belt.Secure  
right end cap into base.  
6. Rotate brush roll to seat  
belt.  
Brush  
Roll  
Pulley  
7. Position hood; secure  
with screws.  
Use GENUINE EUREKA replacement belt, 58065A.  
5
 

Sharp Microwave Oven R 7A54 User Manual
Sony Car Stereo System GT650UI User Manual
Sony Film Camera HDC F950 User Manual
Sony MP3 Player WM EX615 User Manual
Sony Portable CD Player D EJ106CK User Manual
Sony Portable Stereo System 320 User Manual
Sunbeam Bedding Electric Heater MF1500 User Manual
Sunbeam Iron 3050 User Manual
Swisher Lawn Mower ZT2560 User Manual
System Sensor Smoke Alarm 24ATR User Manual