Sony CRT Television KV PG14 User Manual

4-084-117-13(1)  
Trinitron Color TV  
GB  
Operating Instructions  
Before operating the unit, please read this manual thoroughly and  
retain it for future reference.  
KV-TG21  
KV-PG14  
M90  
M72  
© 2001 Sony Corporation  
 
B WARNING  
• Dangerously high voltages are present inside the TV.  
• TV operating voltage: 220 – 240 V AC.  
• Do not plug in the power cord until you have completed making all other connections;  
otherwise a minimum leakage current might flow through the antenna and other terminals to  
ground.  
• To avoid battery leakage and damage to the remote, remove the batteries from the remote if  
you are not going to use it for several days. If any liquid that leaks from the batteries touches  
you, immediately wash it away with water.  
For your own safety, do not touch any part of the  
TV, the power cord and the antenna cable during  
lightning storms.  
For children’s safety, do not leave children alone  
with the TV. Do not allow children to climb onto  
it.  
Do not operate the TV if any liquid or solid object  
falls into it. Have it checked immediately by  
qualified personnel only.  
To prevent fire or shock hazard, do not expose the  
TV to rain or moisture.  
Do not block the ventilation openings of the TV.  
Do not install the TV in a confined space, such as  
a bookcase or built-in cabinet.  
Clean the TV with a dry and soft cloth. Do not  
use benzine, thinner, or any other chemicals to  
clean the TV. Do not scratch the picture tube.  
Do not open the cabinet and the rear cover of the  
TV as high voltages and other hazards are present  
inside the TV. Refer servicing and disposal of the  
TV to qualified personnel.  
Your TV is recommended for home use only.  
Do not use the TV in any vehicle or where it may  
be subject to excessive dust, heat, moisture or  
vibrations.  
 
WARNING (continued)  
Do not plug in too many appliances to the same  
power socket. Do not damage the power cord.  
Do not place any objects on the TV.  
Pull the power cord out by the plug. Do not pull  
the power cord itself. Even if your TV is turned  
off, it is still connected to the AC power source  
(mains) as long as the power cord is plugged in.  
Unplug the TV before moving it or if you are not  
going to use it for several days.  
Install the TV on a stable TV stand and floor  
which can support the TV set weight. Ensure that  
the TV stand surface is flat and its area is larger  
than the bottom area of the TV.  
C Securing the TV  
B KV-TG21 only  
To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.  
20 mm  
3.8 mm  
screws  
clamps  
band  
Screw the band to the TV stand and to the  
provided hole at the rear of your TV.  
or  
(1) Put a cord or chain through the  
clamps.  
(2) Screw one clamp to a wall or pillar  
and the other clamp to the provided  
hole at the rear of your TV.  
Note  
Use only the supplied screws. Use of other screws may damage the TV.  
 
D TV front and rear panels  
TV rear panel  
0
R
L(MONO)  
qa  
qs  
#
TV front panel  
!
(MONO)  
R
L
SELECT  
PROGR  
5
4
2 1  
9
8
7 6  
3
#
Button  
1 !  
2
Function  
Turn off or turn on the TV.  
Remote control sensor.  
Standby indicator.  
3 1  
3
Stereo/bilingual indicator. (KV-TG21M90 only)  
Bilingual indicator. (KV-PG14M72 only)  
Wake Up indicator.  
3
3
4 PROGR +/–  
5 2 +/– *  
6 t  
Select program number.  
Adjust volume.  
Select TV or video input.  
7 SELECT  
8 i  
Select the desired item.  
Headphone terminal. (KV-TG21 only)  
Earphone terminal. (KV-PG14 only)  
Video input terminal.  
8
9, qa t  
0 8  
Antenna input terminal.  
qs T  
Monitor output terminal.  
*
You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote.  
# The R (audio input) jacks are available for KV-TG21 only.  
 
E Connecting optional components  
Connecting to the video input terminal ( t )  
TV front panel  
(MONO)  
#
R
L
Audio/Video cable  
(not supplied)  
Camcorder  
TV rear panel  
Video game  
equipment  
R
L(MONO)  
Antenna cable  
(not supplied)  
Audio/Video cable  
(not supplied)  
VCR  
#
Note  
Do not connect video equipment to t (video input) at the front and the rear of your TV at  
the same time; otherwise the picture will not be displayed properly on the screen.  
Connecting to the monitor output terminal (T)  
TV rear panel  
R
L(MONO)  
Audio system  
Audio/Video cable  
(not supplied)  
VCR  
#
# The R (audio input) jacks are available for KV-TG21 only.  
 
F Troubleshooting  
If you find any problem while viewing your TV, please check the following  
guide. If any problem persists, contact your Sony dealer.  
Symptom  
Solutions  
• Check the antenna cable and connection on the TV, VCR and on the wall.  
• Preset the channel manually again. (See J)  
• Check the antenna setup. Contact a Sony dealer for advice.  
Snowy picture,  
noisy sound  
Good picture,  
noisy sound  
• Select the appropriate TV system. (See J)  
• Press A/B until the sound is optimal. (KV-TG21M90 only)  
• Check the power cord, antenna and the VCR connections.  
• Press ?/1 (power) or ! (main power) to turn on the TV.  
No picture,no sound  
Good picture, no sound • Press 2 + to increase the volume level.  
• Press % to cancel the muting.  
• Do not use a hair dryer or other equipment near the TV.  
• Check the antenna setup. Contact a Sony dealer for advice.  
Dotted lines or stripes  
Double images or  
“ghosts”  
• Use the fine tuning ("FINE") function. (See J)  
• Turn off or disconnect the booster if it is in use.  
• Check the antenna setup. Contact a Sony dealer for advice.  
• Select the appropriate color system. (See J)  
• Adjust the color level. (See K)  
• Check the antenna setup. Contact a Sony dealer for advice.  
No color  
Abnormal color  
patches  
• Keep external speakers or other electrical equipment away from the TV.  
Press ! (main power) to turn off the TV for about 15 minutes, then turn  
it on again to demagnetize the TV.  
The 1 (standby)  
indicator on your TV  
flashes red several  
times after every  
three seconds.  
• Count the number of times the 1 (standby) indicator flashes. Press !  
(main power) to turn off your TV. Contact your nearest Sony service  
center.  
TV cabinet creaks.  
• Changes in room temperature sometimes make the TV cabinet expand or  
contract, making a noise. This does not indicate a malfunction.  
A "boom" sound is  
heard when the TV is  
turned on.  
• The TV's demagnetizing function is working. This does not indicate a  
malfunction.  
 
G Specifications  
KV-TG21M90  
KV-PG14M72  
Note  
Power requirements  
220-240 V AC, 50/60 Hz  
Power consumption (W) Indicated on the rear of the TV  
Television system  
Color system  
B/G, I, D/K, M  
PAL, PAL 60, SECAM,NTSC3.58, NTSC4.43  
NICAM Bilingual B/G, I, D/K  
Stereo/Bilingual system NICAM Stereo/Bilingual  
B/G, I, D/K A2 Stereo/  
;
Bilingual B/G  
Channel coverage  
B/G  
VHF : E2 to E12  
UHF: E21 to E69  
CATV : S01 to S03, S1 to S41  
I
UHF : B21 to B68  
CATV : S01 to S03, S1 to S41  
D/K  
VHF: C1 to C12, R1 to R12  
UHF : C13 to C57, R21 to R60  
CATV : S01 to S03, S1 to S41, Z1 to Z39  
M
VHF : A2 to A13  
UHF: A14 to A79  
CATV : A-8 to A-2, A to W+4, W+6 to W+84  
8 (Antenna)  
75-ohm external terminal  
Audio output (Speaker)  
3W + 3W  
Input: 2* Output: 1  
Input: 2* Output: 1  
3W  
Number of terminal  
(Video)  
Phono jacks; 1 Vp-p, 75 ohms * One input line  
available  
(Audio)  
Phono jacks; 500 m Vrms  
* One input line  
available  
i (Headphone)  
(Earphone)  
Output: 1  
Stereo minijack  
KV-TG21M90 only  
KV-PG14M72 only  
Output: 1  
Monaural minijack  
Picture tube  
21 in.  
14 in.  
Tube size (cm)  
Screen size (cm)  
Dimensions (w/h/d, mm)  
Mass (kg)  
54  
37  
Measured diagonally  
Measured diagonally  
51  
497 x 458 x 487  
25  
34  
375 x 346 x 411  
12  
Design and specifications are subject to change without notice.  
 
H Remote control  
See  
Button  
Function  
0
1 ?/1  
Turn off temporarily or  
turn on the TV.  
qa  
1
2
2 a  
Display the TV program.  
qs  
qd  
3 JUMP  
Jump to previous  
program number.  
1
4
3
6
9
2
5
8
4 PROGR +/–  
5 2 +/–  
6 SELECT  
7 PIC MODE  
9 +/–  
Select program number.  
Adjust volume.  
qf  
7
Select the desired item.  
Select picture mode.  
Adjust items.  
JUMP  
-
SOUND  
MODE  
0
3
4
K
PROGR  
2
qg  
qh  
0
Display on-screen  
information.  
5
qa %  
Mute the sound.  
qj  
qk  
ql  
6
qd t  
Select TV or video input.  
Input numbers.  
qf 0 – 9, ÷  
7
8
FAVORITE  
Timer operations  
qj  
Set TV to turn on  
automatically.  
I
I
9
qk  
Set TV to turn off  
automatically.  
TV  
Sound mode operations (KV-TG21M90 only)  
qg SOUND MODE Select sound mode.  
K
Stereo/bilingual operations  
M
qh A/B  
Select stereo/bilingual  
mode.  
Teletext operations (green label)  
8 x (red, green,  
yellow, blue)  
0
qs  
Not function for your TV.  
qd  
qh  
qj  
qk  
ql FAVORITE  
Not function for your TV.  
 
I
Setting the timers  
You can turn on and off your TV by using the and buttons respectively.  
Setting the Wake Up timer  
\/1  
Press until the desired period of time appears  
1on the screen.  
1
4
2
5
8
3
6
9
WAKE UP TIMER:0H10M  
(After 10 minutes)  
7
JUMP  
-
SOUND  
MODE  
0
PROGR  
2
WAKE UP TIMER:OFF  
(No Wake Up timer)  
WAKE UP TIMER:12H00M  
(After 12 hours)  
The Wake Up timer starts immediately after you  
have set it.  
FAVORITE  
Select the program number or video input you  
2 want to wake up to.  
TV  
Press \/1, or set the Sleep timer if you want the  
3 TV to turn off automatically.  
The indicator on the TV lights up orange when  
the TV goes into standby mode.  
Setting the Sleep timer  
Press until the desired period of time appears  
on the screen.  
SLEEP TIMER:30M  
(After 30 minutes)  
SLEEP TIMER:60M  
(After 60 minutes)  
SLEEP TIMER:OFF  
(No Sleep timer)  
SLEEP TIMER:90M  
(After 90 minutes)  
The Sleep timer starts immediately after you have  
set it.  
Notes  
You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power.  
If no buttons or controls are pressed for more than two hours after the TV is turned on using  
the Wake Up timer, the TV automatically goes into standby mode.  
 
J Presetting channels  
You can automatically preset up to 100 TV channels in numerical sequence  
from program number 1, or manually preset desired channels and channels  
that cannot be preset automatically.  
Presetting channels automatically  
from a specified program number  
Press SELECT until “AUTO PROGRAM” appears  
1
4
2
5
8
3
6
9
1 on the screen.  
Number  
buttons  
7
Press + or – once to enter the “AUTO  
2 PROGRAM” mode.  
JUMP  
-
SOUND  
MODE  
0
PROGR  
2
The on-screen display will start flashing.  
Press PROGR +/– or the number buttons until  
3the desired program number appears on the  
+ or –  
screen.  
FAVORITE  
Press + or – to start presetting channels  
PIC MODE  
SELECT  
4automatically.  
TV  
PROGR +/–  
Presetting channels manually  
Press SELECT until “MANUAL PROGRAM”  
1appears on the screen.  
Press + or – once to enter the “MANUAL  
2 PROGRAM” mode.  
Press PROGR +/– or the number buttons until  
3 the desired program number appears on the  
screen.  
Press + or – until the desired channel picture  
4 appears on the screen.  
To preset other channels manually, repeat steps  
5 3 to 4.  
 
Presetting channels (continued)  
To change the TV system setting  
If the picture or sound is abnormal when receiving programs through the 8 (antenna  
input) terminal  
(1) Press SELECT until “TV SYS” appears on the screen.  
(2) Press + or – to select the appropriate TV system until the picture or sound quality  
is optimal.  
B/G  
I
D/K  
M
To change the color system setting  
If the color is abnormal when receiving programs through the  
8
(antenna input)  
terminal or the t (video input) terminal  
(1) Press SELECT until “COLOR SYS” appears on the screen.  
(2) Press + or – to select the appropriate color system until the color is optimal.  
AUTO PAL SECAM NTSC3.58 NTSC4.43  
To skip program numbers  
(1) Press PROGR +/– or the number buttons until the unused or unwanted program  
number appears on the screen.  
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.  
(3) Press + or – once to enter the “MANUAL PROGRAM” mode.  
(4) Press PIC MODE to skip the unused or unwanted program number.  
(5) Press SELECT to exit the “MANUAL PROGRAM” mode.  
Note  
To restore the skipped program number again, preset the channel automatically or manually.  
To use the fine tuning function  
The fine tuning (FINE) function may help to reduce the following problems:  
double images and lines moving across the TV screen.  
You can use the fine tuning function as below:  
(1) Select the program number you want to adjust.  
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.  
(3) Press + or – once to enter the “MANUAL PROGRAM” mode.  
(4) Press  
to display “FINE” on the screen.  
(5) Press + or – continuously until the above problems are minimized.  
The + or – icon on the screen flashes while tuning.  
(6) Press SELECT to exit the “MANUAL PROGRAM” mode.  
 
K Customizing the picture and sound  
You can customize the picture and sound by selecting the picture and sound  
modes or by adjusting its settings.  
Selecting the picture mode  
Press PIC MODE to select the desired picture mode.  
Select  
To  
1
4
2
5
8
3
6
9
“DYNAMIC”  
“STANDARD”  
“SOFT”  
view high contrast pictures.  
view normal contrast pictures.  
view mild pictures.  
7
JUMP  
-
SOUND  
MODE  
0
PROGR  
2
SOUND  
MODE  
Selecting the sound mode  
B KV-TG21M90 only  
SELECT  
+ or –  
Press SOUND MODE to select the desired sound  
mode.  
FAVORITE  
PIC MODE  
Select  
To  
TV  
9 DYNAMIC”  
listen to dynamic and clear  
sound that emphasizes the low  
and high sound.  
9 DRAMA”  
listen to sound that emphasizes  
vocals and background music.  
9 SOFT”  
listen to soft sound.  
Adjusting the picture and sound settings  
Press SELECT until the desired setting appears.  
1
Each time you press SELECT, the setting item will change as follows:  
PICTURE  
COLOR  
BRIGHT  
BASS  
HUE  
BALANCE  
TREBLE  
SHARP  
Press + or – to adjust the item.  
2
3
To adjust other items, repeat steps 1 to 2.  
Notes  
“BASS”, “TREBLE” and “BALANCE” can be adjusted for KV-TG21M90 only.  
“HUE” can be adjusted for the NTSC color system only.  
Reducing “SHARP” can also reduce picture noise.  
 
L Adjusting the picture position  
B KV-TG21M90 only  
If the picture is slanting, you can adjust the picture position using the  
“PIC ROTATION” function until it is optimal.  
Slanting  
Optimal  
Good morning!  
Press SELECT repeatedly until “PIC ROTATION”  
1appears on the screen.  
+ or –  
Press + or – to adjust the picture position.  
FAVORITE  
2
SELECT  
+
The  
or  
icon on the screen flashes while  
adjusting.  
Note  
To reduce the slanting picture, keep external speakers or other electrical equipment away  
from the TV.  
 
M
Enjoying stereo or bilingual  
programs  
You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo  
systems by using the A/B button.  
When receiving a NICAM program  
Broadcasting  
On-screen display (Selected sound)  
NICAM  
stereo  
(KV-TG21M90 only)  
1
4
2
5
8
3
6
9
MONO  
(Regular sound)  
NICAM  
(Stereo sound)  
t
7
JUMP  
-
SOUND  
MODE  
0
NICAM  
bilingual  
PROGR  
2
NICAM MAIN  
(Main sound)  
NICAM SUB  
(Sub sound) (Regular sound)  
MONO  
t
t
A/B  
NICAM  
monaural  
MONO  
(Regular sound)  
NICAM MAIN  
(Main sound)  
t
FAVORITE  
TV  
When receiving an A2 program  
B KV-TG21M90 only  
Broadcasting  
On-screen display (Selected sound)  
A2  
stereo  
STEREO  
(Stereo sound)  
MONO  
(Regular sound)  
t
A2  
bilingual  
SUB  
(Sub sound)  
MAIN  
(Main sound)  
t
Notes  
If the sound is distorted when receiving a monaural program through the 8 (antenna)  
terminal, press A/B repeatedly until “MONO” appears on the screen. To cancel the monaural  
sound setting, press A/B again until “AUTO” appears on the screen.  
KV-TG21M90 only  
If the stereo sound is noisy when receiving a stereo program, select “MONO”. The sound  
becomes monaural, but the noise is reduced.  
Before receiving a NICAM stereo program in China, please check the NICAM broadcast  
condition in your area. When receiving a NICAM stereo program, the receiving conditions  
might vary depending on area. In addition, different strength of the NICAM broadcast signal  
might affect the receiving quality.  
 

Sennheiser Microphone SK5212 II User Manual
Shindaiwa Blower 68232 94011 User Manual
Shure Microphone MX100 Series User Manual
Sonance Stereo Amplifier ASAP3D User Manual
SonicWALL Welding System SonicWALL UTM Appliance User Manual
Sony Camcorder Accessories VCT 1170RM User Manual
Sony Home Theater System DAV DZ850M User Manual
Sony Radio SRF M80V User Manual
Sony Stereo Amplifier XM DS1600P5 User Manual
StarTechcom Switch SV1631DUSB User Manual