Sony Corded Headset DRGA100 VLT User Manual

4-268-312-11(1)  
English  
Stereo headset  
Features  
Operating Instructions  
Air-through earpads” for long-term wearing comfort.  
Boom microphone design with noise cancelling function.  
Light-weight frame structure and design provide comfort for PC gaming.  
Convenient volume control and mic muting.  
Manual de instrucciones  
Stereo  
Headset  
Supported PC models  
IBM PC/AT or compatible computer with a microphone input jack and a sound  
output jack, or a computer with a built-in sound card.  
It is required that the sound card has a power supply for the microphone.  
It is required that the microphone input jack and sound output jack are aligned.  
This is not compatible with Macintosh computers.  
DR-GA100  
How to use  
©2010 Sony Corporation Printed in Thailand  
1
Connect the (headphone) plug to the headphone jack and connect the   
(microphone) plug to the microphone jack (see fig. ).  
2
Adjust the band of the headset, and wear the earpad marked on your  
right ear, and the one marked on your left ear.  
There is a tactile dot on the unit marked  
to distinguish the left side (see fig. ).  
3
Adjust the position of the microphone for effective pickup of your voice.  
Headset  
Return the position of the microphone to rest near the earpad when not in use  
(see fig. ).  
Note  
If the position of the microphone is not correct, the sensitivity of the microphone will decrease, and  
sound from the headphone may enter the microphone.  
Adjusting the volume level of the microphone  
Check and adjust the volume level of the microphone by the computer. For details on the operation of  
your computer, refer to the operating instructions of your computer.  
Volume control  
Rotate upward to increase the volume and rotate downward to decrease the volume (see fig. ).  
To microphone jack (pink)  
MUTING button  
Press the MUTING button when you want to disable the sound of the microphone (see fig. ).  
To headphone jack (black)  
Specifications  
Cord: 2.5 m (8.20 ft) / Plug: Gold-plated stereo mini plug (for headphone plug), Gold-  
plated mini plug (for microphone plug) / Mass: Approx. 170 g (6.00 oz) (without cord)  
<Headphones>  
Type: Open air, dynamic / Driver unit: 30 mm, dome type (CCAW adopted) / Power  
handling capacity: 1,000 mW (IEC*) / Impedance: 24 Ω at 1 kHz / Sensitivity: 100 dB/  
mW / Frequency response: 14 – 22,000 Hz  
<Microphone>  
Design: Flexible boom microphone / Type: Electret condenser / Open circuit voltage  
level: –38 dB (0 dB = 1 V/Pa) / Effective frequency range: 20 – 10,000 Hz  
<Supplied accessory>  
Operating Instructions (1)  
* IEC = International Electrotechnical Commission  
Design and specifications are subject to change without notice.  
Tactile dot  
Precautions  
Be careful not to use the headset at too loud a volume level. Otherwise, feedback (a  
howling effect) may be heard as the microphone picks up the loud sound from the  
headphone unit.  
Listening with the headset at high volume may affect your hearing. For traffic safety,  
do not use while driving or cycling.  
Do not put weight or pressure on the headset as it may cause the headset to deform  
during long storage.  
The earpads may deteriorate due to long term storage or use.  
The validity of the CE marking is restricted to only those countries when it is legally  
enforced, mainly in the countries EEA (European Economic Area).  
Disposal of Old Electrical & Electronic Equipment (Applicable in the  
European Union and other European countries with separate  
collection systems)  
MUTING button  
Volume control  
 

Sennheiser Microphone BF512 FE User Manual
Sharp Telephone SGH F250 User Manual
Singer Sewing Machine 110W117 User Manual
Singer Sewing Machine G115 User Manual
Sony DVD Player DVP NC655P User Manual
Sony Network Hardware VGP MR200U E User Manual
Sony TV VCR Combo KV 14V4U User Manual
Stovax Indoor Fireplace STOV1008 User Manual
Sunbeam Food Processor LC7900 User Manual
Symbol Technologies Scanner LS 4208 User Manual