Sony MiniDisc Player MZ E707 User Manual

Note  
On t h e re m o t e co n t ro l  
BVa rio u s w a ys o f  
p la yb a ck  
A
B
Re p e a t p la y  
List e n in g t o t ra cks in a sp e cific  
g ro u p (Gro u p Mo d e Pla yb a ck)  
Playback w hen group mode is off:  
Playback starts w ith the first track in the  
disc, and stops w ith the last track in the  
Depending on the specifications of your MD  
recorder, the group function will not work.  
3-234-033-13(1)  
Track number  
The elapsed time  
Track name  
Group name  
1
2
Insert a disc which has group settings  
into the player and play the disc.  
You can use this function to repeat playback  
in normal play, single play, shuffle play, or  
program play mode.  
Track number  
Remote control  
Getting started  
Playing an MD  
The number of total  
tracks in the group  
PLAYMODE  
RPT/ENT  
Hold down PLAYMODE until  
“– – –” in the display.  
Ad ju st in g t h e so u n d q u a lit y  
(Dig it a l So u n d Pre se t )  
Charge the supplied rechargeable battery before using it for the first time.  
disc.  
DISPLAY  
SOUND  
1
Press RPT/ ENT on the remote control  
during playback.  
The number of  
total tracks  
Disc name  
Disc  
Portable MiniDisc Player  
The player enters group skip mode.  
1
Insert an MD.  
X
Track number  
” appears in the display.  
Track number  
Track mode  
You can emphasize the treble and bass to suit  
your taste. The player can store two sets of  
treble-bass adjustments, which can set be  
selected later during playback.  
1
3
Within 5 seconds, turn the control  
repeatedly until the name or number  
of the desired group appears.  
Insert the rechargeable battery.  
1 Slide OPEN to open the lid.  
2 Insert an MD.  
3 Close the lid.  
1 2 3  
4
5 6  
7 8  
Repeat play indication  
Operating instructions  
Insert the battery minus end first  
z
3
The group name appears when you select the  
group on group skip mode. For more details, see  
“Selecting and playing specific groups” in  
“Using the group function.”  
HOLD  
When there is a group name (Example: AAA)  
Playback w hen group mode is on:  
./N>  
To se le ct t h e so u n d q u a lit y  
x
Playback of the selected group starts w ith  
the first track in the group, and stops w ith  
the last track in the group.  
VOL +/–  
b
b
1
Fa ct o ry se t t in g s  
The factory settings of each digital sound  
preset are as follows:  
2
Notes  
Se a rch in g fo r a sp e cific  
t ra ck o r a p o sit io n q u ickly  
(Qu ick Se a rch )  
Bottom side of the player  
• Depending on whether group mode is on or  
off, the operating conditions, or the settings  
may not be selectable or the indications that  
appear may vary.  
• The mode indication appears only during  
playback. It appears for 2 seconds, and is then  
replaced by the elapsed time of the current  
track.  
Group name  
3 Color Info-LED  
Disc  
HOLD  
“WALKMAN” is a trademark of Sony Corporation.  
“SOUND1”: bass +1, treble ±0  
“SOUND2”: bass +3, treble ±0  
Insert an MD w ith the lable side facing up, pushing the  
MD to the direction of the arrow in the illustration.  
When there is no group name  
Group 2  
Group 3  
Group 1  
2
GROUP  
Track  
Track  
Track  
Charge the rechargeable battery.  
MZ-E707  
You can do two kinds of quick searches.  
1
Press SOUND on the remote control  
repeatedly to select “SOUND1” or  
“SOUND2.”  
number  
number  
number  
In d e x se a rch — Searching quickly while  
monitoring the track number or track name  
(factory setting).  
Sony Corporation © 2001 Printed in Japan  
2
1 2 3  
1 2  
1 2  
Ho w t o a sse m b le t h e b a t t e ry ch a rg in g  
st a n d  
Play an MD.  
Group number  
Tim e se a rch — Searching quickly while  
monitoring the elapsed time.  
On t h e p la ye r  
2
VOL+  
To a d ju st t h e so u n d q u a lit y  
Insert the prongs until they are firmly attached.  
VOLUME +/–  
Su p p re ssin g t h e skip s o f  
t h e so u n d (G-PROTECTION)  
1
2
Insert a disc which has group settings  
into the player and play the disc.  
On t h e re m o t e co n t ro l  
1
2
During playback, press SOUND on the  
remote control repeatedly to select  
“SOUND1” or “SOUND2.”  
1
During playback, press DISPLAY on  
the remote control for 2 seconds or  
more.  
GROUP  
WARNING  
VOL–  
1
Insert a disc which has group settings  
into the player, and then play the disc.  
Se le ct in g t h e p la y m o d e  
The G-PROTECTION function was developed  
to provide a higher level of shock resistance  
than that of existing players in order to allow  
the player to be used while jogging.  
Press GROUP.  
The LED lights up orange and the  
player enters group skip mode.  
To p re ve n t fire o r sh o ck h a za rd , d o n o t e xp o se t h e  
u n it t o ra in o r m o ist u re .  
2
3
Turn the control on the remote control  
repeatedly until “SEARCH” flashes in  
the display, and press x on the remote  
control.  
1N>  
You can select from various play modes using  
the PLAYMODE and RPT/ ENT on the  
remote control.  
2
3
Press DISPLAY for 2 seconds or more.  
to a w all outlet  
Press SOUND on the remote control  
for 2 seconds or more.  
3
Within 5 seconds, press . or  
> N repeatedly until the name or  
number of the desired group appears.  
Turn the control repeatedly until  
“GROUP” flashes, and then press x on  
the remote control.  
X
Note  
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.  
.
3 Color Info-LED1)  
The playback sound may skip if:  
— the player receives stronger continuous  
shock.  
1
Press PLAYMODE repeatedly to select  
one of the four play modes, as follows:  
The player changes to the bass-setting  
mode. Pressing SOUND for 2 seconds  
or more again changes the player to  
the treble-setting mode.  
Turn the control on the remote control  
repeatedly until “Index” (index search)  
or “Time” (time search) flashes in the  
display, and press x on the remote  
control.  
> N  
b
x
To prevent fire, do not cover the ventilation of the apparatus with newspapers, table- cloths,  
curtains, etc. And dont place lighted candles on the apparatus.  
Note  
— a dirty or scratched MiniDisc is played.  
x
.
4
Turn the control repeatedly until  
“GROUP ON” flashes, and then press  
x on the remote control.  
Play mode indication  
If no operation is performed within 5 seconds in  
step 3, group skip mode is cancelled. To do the  
procedure, start from step 2 again.  
1 Turn the control towards N> on the remote control (or press > N  
To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the  
apparatus.  
to DC IN 3V  
on the player) to play the disc.  
A short beep sounds in the headphones/ earphones when using the remote control.  
The LED flashes and then lights up.  
Make sure the CHARGE  
lamp turns on.  
“G” appears in the display and group  
mode is turned on. To turn off group  
mode, Select “GROUP OFF” and press  
x.  
AC pow er adaptor  
Ch a n g in g p la yb a ck sp e e d  
(Sp e e d Co n t ro l)  
Speed control function is convenient for such  
uses as language study.  
4
5
Press X on the remote control to pause.  
Certain countries may regulate disposal of the battery used to power this product. Please consult  
with your local authority.  
1 Connect the supplied AC power adaptor to DC IN 3V.  
2 Place the player on the battery charging stand.  
Re g ist e rin g g ro u p s u sin g yo u r  
m in id isc re co rd e r  
Display  
Play mode  
When you select bass-setting mode,  
Bappears. When you select treble-  
setting mode, Tappears.  
2 Pull and turn VOL +/– on the remote control (or press VOLUME +/– on the  
Turn and hold the control on the  
remote control until the desired track  
number/ track name (index search) or  
the desired elapsed time (time search)  
appears in the display.  
(none)  
(normal play)  
All the tracks are played  
once.  
player) to adjust the volume.  
The volume indicator appears in the display, allowing you to check the  
volume level. After you adjust the volume, push back the control.  
Ca u t io n  
Full charging takes about 6 hours and then the CHARGE lamp will go off when  
charging is complete.  
If your MD recorder (MD deck or recording  
MD Walkman) has a function for editing disc  
names, you can use it to register groups even  
if your recorder does not have the group  
function.  
Make sure you enter the text string exactly as  
described below. The group function will not  
work if you enter the text string incorrectly.  
The use of optical instruments with this product will increase eye hazard.  
On t h e p la ye r  
The playing speed can be set at 80% to 110%  
normal speed, in seven steps of 5% each.  
1”  
(single play)  
A single track is played  
once.  
3
Turn the control on the remote control  
repeatedly to adjust the bass or the  
treble.  
Do n o t o p e ra t e t h e p la ye r w h e n yo u p la ce it o n t h e b a t t e ry ch a rg in g st a n d  
o r d u rin g ch a rg in g . If yo u d o so , it m a y ca u se t h e p la ye r t o m a lfu n ct io n o r  
p re ve n t t h e b a t t e ry fro m ch a rg in g .  
CAUTION — INVISIBLE LASER RADIATION WHEN OPEN  
DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS  
In fo rm a t io n  
1
2
Insert a disc which has group settings  
into the player, and then play the disc.  
To st o p p la y, p re ss x.  
SHUF”  
(shuffle play)  
All the tracks are played  
in random order.  
Playback starts from the point you last stopped playing. To start playback from the  
beginning of the disc, turn and hold the control towards N> on the remote control  
(or hold down > N on the player) for 2 seconds or more.  
1) The LED indicates the current operating status by the lighting up in the following colors.  
When the battery power is exhausted, the LED starts flashing. For more details, see  
“When to replace or recharge the battery.”  
1
2
During playback, press DISPLAY on  
the remote control for 2 seconds or  
more.  
6
Press X on the remote control to cancel  
the pause.  
Example: While adjusting the bass,  
the cursor moves. (Position: 2)  
Press GROUP for 2 seconds or more.  
The LED lights up green and group  
mode is turned on. To turn off group  
mode, press GROUP for 2 seconds or  
more again. The LED lights up red.  
Usin g t h e d ry b a t t e ry  
PGM”  
Tracks are played in the  
(program play) order that you specified.  
Attach the dry battery case to the  
player.  
Insert the battery minus end first.  
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE  
PRODUCT OR THE USE OF ANY PRODUCT.  
z
Turn the control on the remote control  
repeatedly until “SPEED” flashes in  
the display, and then press x on the  
remote control.  
• If you do this procedure while the player is in  
shuffle play mode, shuffle play starts from the  
track that you selected.  
To sp e cify g ro u p s  
LED color  
Red  
Operating status  
List e n in g t o t ra cks in a d e sire d  
se q u e n ce (Pro g ra m Pla y)  
3
4  
±0  
+3  
4
Normal play (The LED lights up continuously)  
Group mode* (The LED lights up continuously)  
Group skip mode* (The LED lights for about 5 seconds)  
1
Change the disc name to the following  
by using your MD recorder:  
z
• If the player reaches to the first track or the last  
track on the disc as you are turning the control  
in step 5, it will return to the last track or the  
first track, respectively. (In group mode, if the  
player reaches to the first track or the last track  
in a group as you are turning the control in step  
5, it will return to the last track or the first track  
in that group, respectively (see “Using the  
group function”).  
The sound can be adjusted in eight  
steps, from 4 to +3.  
The player changes to speed-setting  
mode.  
Green  
• When group mode is on, it is possible to do  
repeat play, shuffle play, or program play. For  
details on the respective operations, see  
“Selecting the play mode.”  
2
Orange  
b
1
During playback, press PLAYMODE  
on the remote control repeatedly until  
“PGM” flashes in the display.  
0;[Disc name] // [First track of group 1 ]-  
To set the other digital sound preset,  
press SOUND to select “SOUND1” or  
“SOUND2,” and then do steps 2 and 3.  
1
*For more details, see “Using the group function.”  
3
Turn the control to select the playback  
speed.  
Select the speed while listening the  
sound.  
“+” shows the normal speed and the  
cursor shows the playback speed you  
are selecting.  
A
B
• It is possible to save group modes on/ off  
setting in the personal disc memory.  
• In group mode, turning the controls on the  
remote control towards N> during  
playback of the last track of a group moves  
playback to the first track of the group.  
Turning the control 2 times on the remote  
control towards .while playing the first  
track of a group moves playback to the last  
track of the group.  
To  
Do this (Beeps2) in the headphones)  
[Last track of group 1] // [Name of group 1 ]-  
Insert a LR6 (size AA) alkaline dry battery.  
To operate the player for the longest possible time, use the dry battery together  
with a fully rechargeable battery.  
Find the beginning of  
the current track or  
the previous track3)  
Turn the control towards . on the remote control once  
(three short beeps). (Or press . on the player once.)  
Turn the control towards . on the remote control repeatedly  
(continuous three short beeps). (Or press . on the player  
repeatedly.)  
4
Press RPT/ ENT on the remote control.  
The sound settings are stored and the  
playback display appears again.  
B
C
[First track of group 2] // [Last track of group 2 ]-  
2
Turn the control on the remote control  
repeatedly to select a track number.  
B
B
To se le ct a p re se t so u n d  
Press SOUND repeatedly to select  
“SOUND1,” “SOUND2.”  
Selecting no display turns off the digital  
sound preset function.  
Usin g t h e g ro u p fu n ct io n  
[Name of group 2] // ......  
Find the beginning  
of the next track4)  
Turn the control towards N> on the remote control (two  
short beeps).  
3
Example: When the playback speed is  
95% of the original speed, “–” and the  
cursor w ill flash alternately.  
Make connections and unlock the  
The MZ-E707 can be used with a disc which  
has group settings.  
The group function is useful for playing a  
great number of tracks, or tracks that have  
been recorded in MDLP (LP2/ LP4) mode.  
C
Press > N on the player once.  
HOLD control.  
A
B
C
Disc name  
Track number  
Group name  
Track  
Program number  
Go backwards  
while playing  
Turn and hold the control towards  
Hold down . on the player.  
.
on the remote control.  
Connect firmly.  
number  
Se le ct in g a n d p la yin g sp e cific  
g ro u p s (Gro u p Skip Fu n ct io n )  
z
Go forward  
while playing  
Turn and hold the control towards N> on the remote control.  
/ / Separator between group names  
3
Press RPT/ ENT on the remote control.  
The track is entered.  
You can set a preset sound while playback is  
paused.  
80% 100% 110%  
Hold down > N on the player.  
When playing a disc with group settings, the  
group skip function allows you to jump from  
the currently playing group to any other  
group on the MD. The group skip function  
can be used at any time during playback,  
regardless of whether the player is in group  
mode on or not.  
;
Separator between track number and  
Group name  
To i jack  
The playing speed can be set at 80% to  
110% normal speed, in seven steps of  
5% each.  
Wh a t is a d isc w it h g ro u p  
se t t in g s?  
This is a disc with settings that organize  
tracks into groups, and which allow those  
groups to be selected.  
The MZ-E707 does not support the recording  
of group settings. Use your MD recorder to  
record group information, and then use the  
MZ-E707 for playback.  
Pause  
Press X on the remote control (continuous short beeps).  
Press X on the remote control again to resume play.  
Notes  
(Ex.) Set the following groups for the disc  
named “Collections ”:  
• Settings cannot be changed using the operation  
Remove the MD  
Press x, and then slide OPEN.5)  
buttons on the player.  
4
Press x on the remote control to set the  
playback speed.  
During playback speeds other than  
normal, “S” appears to the right of the  
elapsed time.  
Group name for tracks 1-7:  
My Favorites2001winter”  
Group name for tracks 8-17:  
Jun&Tacsunshine head”  
Group name for tracks 18-24:  
THE NIGHT BUTTERFLYS  
Group name for tracks 25-32:  
Dream World/Kiss Me!  
2)  
• When using a digital sound preset, the sound  
may break or become distorted if the volume is  
turned up too high, depending on the settings  
or the track.  
You can turn off the beep sound. For more details, see “Turning off the beep sound.”  
If you turn the control towards  
4
5
Repeat steps 2 and 3 to select other  
tracks in the desired sequence.  
3)  
4)  
5)  
.
on the remote control (or press  
.
on the player) during the  
first track of the disc, the player goes to the beginning of the last track on the disc.  
If you turn the control towards N> on the remote control (or press > N on the player) during  
the last track of the disc, the player goes to the beginning of the first track on the disc.  
If you open the lid, the playback will begin from the beginning of the first track (except when disc  
information is stored to the personal disc memory or when group mode is on).  
When group mode is off:  
Disc  
Press RPT/ ENT for 2 seconds or more.  
The settings are entered and playback  
starts from the first programmed track.  
Track number  
BOt h e r o p e ra t io n s  
HOLD  
HOLD  
Disc  
z
1 2 3 5 6 7 8  
4
z
• The program play settings will remain in  
memory even after playback finishes or is  
stopped.  
• You can set the program play up to 20 tracks.  
• The settings can be stored to the personal disc  
memory.  
Ho w t o u se t h e co n t ro l o n t h e re m o t e co n t ro l  
Te xt st rin g e n t e re d :  
0;Collections/ /  
1-7; My Favorites“2001winter”/ /  
8-17;Jun&Tac“sunshine head”/ /  
18-24;THE NIGHT BUTTERFLYS/ /  
25-32;Dream World/ Kiss Me!/ /  
The MZ-E707 supports the newly developed DSP TYPE-R for ATRAC.  
It thus allows you to enjoy TYPE-R high-quality sound from MDs recorded in SP stereo on TYPE-R-  
equipped MD decks, etc.  
Group 2  
Group 3  
Group 1  
z
Vie w in g t h e t ra ck n a m e  
a n d p la yin g t im e  
Playback: Turn the control towards N> while the player is stopped.  
FF : Turn and hold the control towards N> during playback.  
REW: Turn and hold the control towards . during playback.  
AMS: Turn the control towards . or N> during playback.  
Although all settings will be lost when you  
remove the disc from the player, the settings can  
be stored to the personal disc memory. For more  
details, see “Storing the settings for individual  
discs.”  
Track  
number  
Track  
Track  
skip  
skip  
skip  
number  
number  
Note  
When group mode is on:  
Disc  
You can check the track or disc name, track  
number, the elapsed playing time of the  
current track, the number of the tracks  
recorded on the MD, the group name, and the  
total number of tracks in a group.  
1 2 3  
4
5 6  
7 8  
When removing the disc, make sure to press x first, and then slide OPEN.  
Notes  
Group 1  
Group 2 Group 3  
Vie w in g t h e d isp la y w in d o w o f t h e re m o t e co n t ro l  
N>  
Play/FF/AMS  
z
• All program settings are lost when the lid is  
opened.  
Note  
z
• Up to 99* groups can be registered on a single  
MD.  
• The characters “;”, “/ ”, and “–” can be used in  
a group name.  
• You can register the same group name more  
than twice on the same MD.  
Track  
number  
Track  
number  
Track  
number  
The playback sound will be affected by the  
If your recorder has a function for editing disc  
names, you can use it to register groups. For  
details, see “Registering groups using your  
minidisc recorder.”  
.
• If no settings are made for 5 minutes while the  
player is stopped, the settings made up to that  
point are entered.  
• If you turn on group mode during program  
play, the program play is canceled.  
A
B
playback speed.  
REW/AMS  
Track number Track name6) or elapsed time of the track  
Adjusting the volume (VOL +/–)  
1 2 3 1 2  
1 2  
6)  
Appears only with MDs that have been electronically labeled.  
VOL+  
1
Press DISPLAY on the remote control.  
Each time you press DISPLAY, the  
display changes as the follows:  
• You can specify a group without entering a  
group name (C) for it.  
skip  
skip  
skip  
z
• The player can play the track recorded by 2 × or 4 × long playing mode (LP2 or LP4). Normal stereo  
playback, LP2 stereo playback, LP4 stereo playback or monaural playback is automatically selected to  
match the audio source.  
VOL–  
* The actual number depends on the editing  
ability of your recorder and may be less than 99  
in some cases.  
• The display on the remote control will turn off shortly after you press x.  
Pull  
Turn  
Push back  
 

Shure Musical Instrument Amplifier WL93 User Manual
Singer Sewing Machine 105 1 User Manual
Snapper Computer Monitor EI5223 User Manual
Sony Carrying Case SJKP71 User Manual
Sony Computer Monitor SDM HS94P User Manual
Sony Marine Radio STR ZA3000ES STR ZA2000ES STR ZA1000ES User Manual
Southwestern Bell Cordless Telephone 26963 User Manual
Summer Infant Safety Gate 07260 User Manual
Sun Microsystems Network Cables 511 User Manual
Tanita Scale BF 666 User Manual