StarTechcom Switch 30W 8023at User Manual

Instruction Manual  
4 Port Gigabit PoE+ Injector Midspan Hub 52V / 30W - 802.3at / 802.3af  
POEINJ4G  
Side View - PoE (Data and Power)  
DE: Bedienungsanleitung - de.startech.com  
FR: Guide de l'utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
Packaging Contents  
• 1x 4 Port Gigabit PoE+ Injector  
RJ45 Gigabit PoE Ports  
*actual product may vary from photos  
• 1x Universal Power Adapter  
• 3x Power Cords (NA/UK/EU)  
• 1x Instruction Manual  
LED Indicators  
LED  
System Requirements  
• RJ45 terminated Cat5 or higher Ethernet cabling  
• 10/100/1000 Mbps compatible Ethernet network  
• Available AC electrical outlet  
Indication  
Solid: Indicates that the POEINJ4G is  
Power (Green)  
powered on  
Solid: Indicates that the specific  
port (1 to 4) has a PoE or PoE+ device  
connected  
PoE in-Use(Green)*  
Product Overview  
Front View  
Note: If the input DATA line contains any PoE power, the PoE In-Use  
LED for that port may not light up.  
LEDs  
Installation and Operation  
The POEINJ4G can be installed between a regular Ethernet switch  
and PoE powered devices, and will provide power to the connected  
PoE powered devices without impacting regular data transmission  
performance.  
1. Ensure there are no devices connected to the Data & Power (PoE)  
ports prior to connecting the Power Adapter to the POEINJ4G.  
2. Connect the provided Power Cord for your region (NA, UK, or EU)  
to the provided Power Adapter, then to an AC electrical outlet.  
Then connect the Power Adapter to the DC Power Input on the  
POEINJ4G. Ensure that the “PowerLED is lit.  
DC Power Input  
Side View - Data Only  
3. Using RJ45 Ethernet cable, connect up to four source network  
devices (i.e. router, switch, computer, etc.) to the Gigabit Data  
Ports on the POEINJ4G.  
4. Using RJ45 Ethernet cable, connect up to four PoE (802.3af 15W)  
or PoE+ (802.3at 30W) complaint device(s) to the Gigabit PoE  
Ports on the POEINJ4G.  
RJ45 Gigabit Data Ports  
*Depending on your application, alternatively you can connect the  
Ethernet cable to a PoE splitter device to separate data and power at  
the remote end (for use with a non-PoE powered device).  
Manual Revision: 01/07/2015  
 

Solid State Logic Network Card X Logic Series User Manual
SonicWALL Security Camera es4300 User Manual
Sony Flat Panel Television 32CX52X User Manual
Sony MiniDisc Player Model PMC MD55 User Manual
Soundstream Technologies Headphones VHP 9002 User Manual
Stamina Products Elliptical Trainer A550 705 User Manual
Stanton Stereo System CMP800 User Manual
StarTechcom Switch SV231DPDDUA User Manual
Sungale Tablet ID710WTA User Manual
Tannoy Cell Phone T303 User Manual